A spray emulsion is formulated like a very fluid oil-in-water emulsion: the emulsifying system must remain stable with very low viscosity, so that the product can pass through a pump and deposit in a fine veil on the skin or hair. The Nourish and Shield Spray formula from Green Line Ingredients provides a complete example: a moisturizing and softening milk that helps preserve the skin barrier of sensitive, dry, or weakened skin, built around GreenWax™ GOC MB, a natural emulsifier designed for sprays.
4 of its ingredients come from the Green Line Ingredients range. The finished product is a fluid white to off-white milk, with a pH of 5.0 to 6.0, and it is entirely manufactured at low temperature, between 45 and 50 °C.
What is the role of Green Line Ingredients in this formula?
GreenWax™ GOC MB (3.75 %) is the emulsifier of the formula. Its INCI, Glyceryl Oleate Citrate, makes it a natural oil-in-water emulsifier, anionic and PEG-free, usable both cold and hot. It is designed for low-viscosity formulas and sprays: it stabilizes about 20% of vegetable oils (sweet almond, olive, triglycerides, shea) in a milk fluid enough to be sprayed, with a light and non-sticky feel.
GreenGard™ TBG MB (2 %) is the preservation system of the formula. This 100% natural blend combines triethyl citrate, glyceryl caprylate, and benzoic acid. It acts broadly against Gram-positive and Gram-negative bacteria, yeasts, and molds, and integrates directly into the oily phase.
Radigard™ SF-R (0.5%) is an antioxidant based on rosemary extract in safflower oil. It protects vegetable oils from oxidation and extends the stability of the product, serving as a natural alternative to tocopherols.
GreenGard™ PA12 (0.1%) is a rice-derived sodium phytate, in liquid form, added right from the aqueous phase. This chelating agent binds metallic ions in water, which helps preserve the stability of the formula. It replaces tetrasodium EDTA at an equal dose and forms a biodegradable complex.
Can this spray emulsion be used on hair?
Yes, as a starting base. Its fluid and non-sticky milk texture, its vegetable oils (sweet almond, olive, shea), and its spray format make it a good option for a leave-in hair treatment: nourishing mist for lengths and ends, or detangling milk to spray on damp hair.
This use is not provided for by the original formula: it needs to be developed and validated by your laboratory, particularly regarding the choice of fragrance, deposition on the fiber, and spray quality.
How to make the Nourish and Shield Spray?
All manufacturing is done between 45 and 50 °C, a lower temperature than that of many classic emulsions, which are heated around 70 to 75 °C. This is an energy and cooling time saving.
- In the main beaker, weigh phase A and heat it to 75-80 °C while stirring with a propeller.
- In a separate container, pre-mix phase B until a homogeneous suspension is obtained, then slowly add it to the main beaker while stirring with a propeller. Continue mixing and heating to 45-50 °C.
- In an auxiliary beaker, weigh phase C and heat it to 45-50 °C while stirring, until fully melted.
- When the main beaker is homogeneous and at temperature, transfer to the homogenizer while maintaining the temperature.
- When both beakers are homogeneous and at temperature, slowly pour phase C into the main beaker while homogenizing. Homogenize for 30 seconds to 1 minute per 100 g of batch, while maintaining the temperature.
- Switch to scraping agitation and cool below 50 °C.
- Add phase D and mix until homogeneous.
- Check the specifications and, if necessary, adjust the pH with phase E.
- Homogenize for another 30 seconds to 2 minutes per 100 g of batch, check that the batch remains compliant, then cool to room temperature under scraping or propeller agitation.
- Package in a spray bottle.
What are the characteristics of the finished product?
Characteristic | Value (at room temperature) |
|---|---|
Appearance | Fluid milk, which sprays |
Color | White to off-white |
Odor | Characteristic of the added fragrance (0.2 %) |
pH | 5.0 to 6.0 |
At Cosmetic Innov Access
Cosmetic Innov Access is the exclusive distributor of Green Line Ingredients in France. The Green Line Ingredients in this formula, GreenWax™ N V2 MB, GreenGard™ LA, BioFer™ Sugar Kelp, and GreenGard™ PA, are available from us at all scales: from small quantities to test the formula in R&D to industrial volumes for production, with a single point of contact in France. Each delivery is accompanied by its complete regulatory documentation.
→ Discover all the Green Line Ingredients available at Cosmetic Innov Access
The essentials
The Nourish and Shield Spray formula shows that a natural spray emulsion relies on an emulsifier suitable for fluid formulas, GreenWax™ GOC MB, complemented by the GreenGard™ TBG MB preservation system, the antioxidant Radigard™ SF-R, and the chelator GreenGard™ PA12. Manufactured at low temperature, it is suitable for skin care and can serve as a base for a hair spray. All Green Line Ingredients in the formula are available at Cosmetic Innov Access, from small quantities to industrial volumes.
Do you want to adapt this formula to your brand? Contact Cosmetic Innov Access via our contact page.
Indicative formula provided by Green Line Ingredients (Nourish and Shield Spray, version of 11/07/2024), to be adapted and validated by your laboratory. Hair use is an adaptation option proposed by Cosmetic Innov Access. This formula is not a commercial product.